
Optical frames
& reading glasses,
made in China.
We manufacture and supply optical frames, reading glasses, yellow-lens yellow-tinted low-light glasses, sunglasses and red-tinted lenses for optical retailers, distributors and pharmacy chains.
What we make
19 styles in stock moulds. Frames and lenses are quoted per model — full measurements, colours and coating options are supplied with the price list.



















Have a drawing or a sample?
Send it over and we quote tooling, MOQ and lead time for a new mould.
Enquire ↗What the lens
does to light.
A blue-light lens is a filter. The one claim we make is transmission — how much light gets through, wavelength by wavelength.
Our stock blue-light lens carries a rare-earth additive, which gives the blank a light amber-tea tint. If you need a clear lens instead, the same band can be addressed with a reflective coating — see the coating options below. The effect shows up in the transmission curve below: a hard cut below 400 nm, a graded slope across 400–500 nm, and near-full transmission above.
- UV CUT
- Below 400 nm both curves drop to roughly 0 %T — UV is absorbed by the lens material, not by the tint.
- 400–450 nm
- This is where the two curves separate. At 450 nm our lens sits near 55 %T against 90 %T for a standard clear lens — about a third less high-energy blue light reaching the eye.
- ABOVE 500 nm
- 89–95 %T. Colour rendering and contrast stay essentially unchanged, so the lens is usable all day rather than as a night-only tint.
- STATUS
- Non-prescription. Sold as an optical filter, not a medical device. No therapeutic or disease-prevention claim is made or implied.
Coatings we apply in-house
Coating is specified per order and quoted with the lens — mix them on the same job, and tell us the combination when you send the model list.
Anti-reflective (AR / OAR)
Multilayer coating on both surfaces. It suppresses the light that reflects off the back of the lens and scatters toward the eye — the ghosting and veiling glare an uncoated lens shows. Transmission rises, contrast reads cleaner, and the lens sits almost invisible in the frame.
Hydrophobic & oleophobic
Water beads and oil wipes off in one pass instead of smearing. Fewer wipes means fewer micro-scratches, so the surface stays optically clean for longer and the coating lasts.
Blue-light reflective
A multilayer coating that reflects part of the 400–450 nm band instead of absorbing it in the substrate. Nothing is dyed into the blank, so the lens stays clear — no amber tint, no colour shift looking through it. We also tint blanks if you want the absorption route; say which when you send the model list.
How orders run
Stock styles, short runs
Order any model from the catalogue from 300 pcs. Mixed colours within one style are accepted, and mixed models can be packed into one carton.
Your logo, your packaging
Temple printing, lens etching, cases, pouches and retail boxes. Send artwork and we confirm the print position and packaging spec before production.
Development from a sample
Send a drawing or a physical sample and we quote tooling, MOQ and lead time for a new mould. Existing moulds can be modified for colour and hardware.
Send us the models
you need.
Tell us the model numbers, quantities and destination port. We reply with a quotation, lead time and the specification sheet for each model.
- Phone
- +86 186 5963 0022
- Address
- Beside Longwen Middle School,
Longwen District, Zhangzhou,
Fujian, China - Hours
- Mon–Sat, 09:00–18:00 GMT+8
- Port
- Xiamen
- Reply time
- 1 business day